Ищете производителя крепежа, который не нарушает сроки поставки?

Производство крепежа для металлоконструкций до 5 тонн / день с доставкой по всему миру

Гарантируем сроки - Вернем 5% от суммы заказа при нарушении срока поставки

Сертфикат ISO 9001:2015
Международная аккредитация
Системы Менеджмента Качества
Экономия от 20%
Вы работаете на прямую с заводом, а не гаражным производством
Приступим к расчету Вашего заказа
через 2 минуты
Нажимая кнопку, Вы соглашаетесь с обработкой персональных данных

Особенности стандартов

Стандарт ASME B16.5 регламентирует непосредственно изделие и его практическое использование. К примеру, устанавливает рабочее давление при конкретной температуре для фланцев. Эти стандарты базируются на данных, которые опубликованы в международной стандартизации.

Размеры и вес тяжелых стальных гаек для шпилек соответствуют спецификации ASME B18.2.2. Стандарт ASTM затрагивает электрические, физические, механические свойства изделия, химический состав, способы испытаний и все требования к металлопрокату (конфигурация, габариты и так далее). Наиболее распространенными материалами для шпилек (для фланцев) являются ASTM A193 (класс B7, B8, B8M, B8T), ASTM A453 (класс 660), ASTM A320 (класс L7, L7M) и ASTM A182 (дуплексный и супердуплексный болт). Для агрессивных растворов и сред, шпильки могут быть покрыты ксиланом и другими материалами.

Применяемые стали

ASTM A193, A320
B5L43
B6BB Class 1&2
B7BBM Class 1&2
B7MBBT Class 1&2
L7BBC
L7MB16
ASTM A194
2H8
2HM8A
48C
68M
78MA
7M8T
ASTM A453, A286
660A
660B
660C
660D
ASTM A182, A276, A459
S31803 (F51)
S32750 (F53)
S23760 (SA, FLT, FG)
S31254 (SMO 254)
Расчет веса / количества
болты
гайки
шайбы плоские
шайбы гровера
винты

Стандарт

Диаметр, ММ

Длина, ММ

шт кг

Результаты расчёта

КЛАСС ПРОЧНОСТИ
ПОКРЫТИЕ
диаметр длина шт кг
шт
кг

Получите расчет стоимости токарных работ в течение 2 минут

Наша сильная сторона - сроки подготовки проекта и поставок. Уже через 2 минуты после запроса, менеджер начнет подбор вариантов
Чего ожидать от сотрудничества с нами?
Гарантия качества

Все изделия проходят 3й контроль качества, начиная от входного контроля материалов и заканчивая нашей лабораторией “разрушающего контроля” (хим анализ, УЗК, испытания на ударную вязкость и разрыв при t до 140C.).

Мы аккредитованы по международной Системе Менеджмента Качества ISO 9001:2015 , что свидетельствует о соответствии наших изделий международным стандартам.

На производстве используются высокотехнологичные станки ЧПУ импортного производства

Финансовая гарантия сроков

Строгое соблюдение сроков - наша отличительная черта.

Благодаря внедренной ERP-системе и регулярному наличию сырья, в 99% случаев заказ сдается в срок или раньше.

Не успели в срок? Возвращаем 5% от стоимости заказа.

Цены от производителя

Вы получаете только выгодные цены, за счет:

  • - внедренной системы бережливого производства,
  • - оптимизации издержек,
  • - отсутствию посреднических наценок.

При крупных заказах - предоставляем скидки и индивидуальные условия. Вы получаете только выгодные цены, за счет:

Приступим к расчёту Вашего заказа через 2 минуты
Наша сильная сторона - сроки подготовки проекта и поставок. Уже через 2 минуты после запроса, менеджер
начнет подбор вариантов
Скопируйте почту
Отправьте Ваш запрос
Через 2 минуты менеджер
начнет расчет вариантов
We manufacture fasteners for market leaders
Delivered over 1,000,000 tons of fasteners since 2015

Project: Omsk NKZ

Task: Flange Fastener Manufacturing

Client: Gazpromneft

Description: Working with a major oil refinery has made flange fasteners a priority at this stage in our company's life.

In working on a new type of product for us, we got the opportunity to apply the experience of previous cases and our own developments and in a short time become a leading manufacturer of flange fasteners.

This is the result of hard work and proof that the company's development vector, chosen several years ago, turned out to be correct.

Project: ZapSibNefteKhim-2

Task: Supply Foundation Bolts

Client: Technip

Description: Technip is the largest European company involved in the creation of objects around the world. In 2015-2016, they were looking for contractors for construction in Tobolsk.

The main condition was compliance with high technical requirements for products. Quality control was carried out by a representative of the customer's company, which inevitably led to difficulties due to the insolvency of some contractors.

It was this case that became the starting point in the construction of our own factory. After all, only by fully controlling all stages of production can you be 100% sure of the result.

Project: Amur GPP

Task: Supply of embedded parts

Client: Renaissance Industries

Description: Work with a Turkish holding engaged in construction and energy began with the supply of foundation bolts to the Amur GPP. By that time, we had our own workshop and were actively developing this area, reducing time and production costs.

Further work on embedded parts for the same site revealed two pain points customers face: timing and traceability. Having experience of working with European companies and focusing primarily on international quality standards, we expanded our production by purchasing equipment for automated submerged arc welding.

Project: Linde Engineering

Task: Supply of foundation bolts - 110 tons

Client: ZapSibNefteKhim-2

Description: The main principle of our company is honesty in everything, down to the smallest detail.

Integrity is the cornerstone of our brand reputation.

We have gone from completing small orders and tenders in 2013 to joint projects with Linde Engineering, Technip and CASALE.

Looking back, we can say with confidence that the path we have chosen is the right one.

To become a partner of Saotron, leave a request in the feedback form on our website pkfsaotron.com

Ваш проект в надежных руках
Павел Волынский
Коммерческий директор
Дмитрий Лебедев
Ведущий менеджер по продажам
Иван Агапитов
Начальник производства
Екатерина Агапитова
Менеджер по логистике
Изготовим любой крепеж ASME
по Вашим чертежам
Изделия любого
объема
и сложности
Большой опыт работы с крупными и сложными заказами. Оцифровка процессов позволяет сократить временные издержки и изготавливать большие объемы продукции за меньшие сроки без потери качества
Предприятие
полного цикла
производства
Мы не только изготавливаем, но и проводим термообработку крепежа, наносим защитные составы, включая грунтование, гальваническое, горячее или термодиффузионное оцинкование
Открытость
и прозрачность
деятельности
Мы открыты для наших зазкачиков в любое удобное время организовать экскурсию по нашему производству
Быстрая
логистика
по всему Миру
Собственный автопарк позволяет сократить стоимость и сроки доставки готовых изделий. Производство находится в 5 мин от трех транспортных компаний: Байкал Сервис, Деловые Линии, ПЭК
Сертификаты соответствия
ISO 9001:2015
Сертификат соответствия 1
Сертификат соответствия 2
Сертификат соответствия 3
Политика от 2020
Приступим к расчёту Вашего заказа через 2 минуты
Наша сильная сторона - сроки подготовки проекта и поставок. Уже через 2 минуты после запроса, менеджер
начнет подбор вариантов
Скопируйте почту
Отправьте Ваш запрос
Через 2 минуты менеджер
начнет расчет вариантов

Delivery

DELIVERY OF PRODUCTS BY OWN TRANSPORT:

  • FIAT DUCATO (1.5 tons, 4 meters)
  • IVECO (5 tons, 6 meters)
  • KAMAZ (10 tons, 6 meters)
  • MAN (20 tons, 13.5 meters)

In Yekaterinburg: Cost: from 2000 rubles. When ordering from 300,000 rubles, delivery in Yekaterinburg is free of charge. Delivery time: within 3 hours.

For RF:
Cost: calculated individually, based on the route and volume of the cargo.
Free shipping is discussed individually.
Delivery time: from 1 to 8 days.

BY AUTOMOTIVE TRANSPORTATION COMPANIES:

  • Business Line
  • Baikal Service
  • Ratek
  • PEC
  • Autotrading
  • CDEK

Cost: according to the tariffs of transport companies.
Delivery time: from 1 to 8 days.

Railway Transportation:

Cost: from 100,000 rubles to 350,000 rubles;
Delivery time: from 3 to 20 days.

Pickup

Sverdlovsk region, Yekaterinburg,
620034, Polezhaeva 10A

Working hours:
08:00 - 17:00,
Monday-Friday.

Download company presentation (pdf. 2.77 Mb)

Fasteners for metal structures

Fasteners for metal structures from the "Saotron" company are products of impeccable quality, manufactured in accordance with the requirements of GOST / TU / ISO / DIN / or the Customer's documentation. We are always ready to quickly and in any volume provide fasteners to large production and construction organizations around the world. Delivery is carried out within the agreed time in a way convenient for the Customer.

Fasteners for metal structures

Fasteners for metal structures will help to fix the details of metal structures, mount equipment, and reliably fix metal sheets.

Assortment

In our company you can order bolts, washers and nuts.

Fastener type
Diameter / Length of the rod
Strength class
Steel grades
Nuts
GOST 5915-75 and GOST 5927-70
M6-M48
6; 8; 9; 10; 12
35; 40Х; 09G2S
GOST R 52645-2006
M16-M48
6; 8; 9; 10; 12
30; 40; 35Х; 40Х
GOST 10605-94
M52-М90
6; 8; 9; 10; 12
35; 40Х; 09G2S
BOLTS
GOST 7798-70 и GOST 7805-89
M6-M48
40-350
4.6; 5.6; 6.6; 8.8; 9.8; 10.9; 12.9
20; 30; 35; 45; 40Х; 09G2S; 30ХGSA; 35XGSA; 20G2R
GOST R 52644-2006
M16-M48
40-300
6.8; 8.8; 9.8; 10.9; 12.9
40X; 30X3MF; 09G2S; 30X2NMFA; 20X2NMTRB
GOST 10602-94 и GOST 18125-72 
M52-М90
90-600
6.8; 8.8; 9.8; 10.9; 12.9
20; 30; 35; 45; 40H; 09G2S; 30HGSA; 35HGSA; 20G2P
Washers
GOST 11371-78
М6-М48
 
 
GOST R 52646-2006
16-48
 
 

 

Types of coatings

Our products are presented both uncoated and in cold (electroplating) and hot galvanizing or thermal diffusion.

  • Bolts.

This is a fastener in the form of a rod with an external thread. It usually has a hexagon head for a wrench. Bolts with a nut form a strong connection. Their rods are covered with thread. They vary in length and diameter. There are heads of special and standard design. The material and coating of the products directly affects the durability and resistance to negative environmental influences. We use cold and hot galvanizing, thermal diffusion. You can also buy metal fasteners without coating.

  • Nuts.

This is a fastener in the form of a part with a threaded hole, which forms a connection using a stud, bolt or screw. Such threaded fasteners are used in the manufacture of collapsible joints. They have found application both in everyday life and in industry. Differ in geometry,

dimensions, material and strength class. The products are compatible with studs, bolts and screws. For fixing, end and cap keys are used.

These fasteners are divided by shape, material of manufacture and strength. If the nut is used in conditions with intense exposure, for example, at high humidity, then a galvanized steel product is used. It is characterized by durability, corrosion resistance, preservation of reliability and durability throughout the entire service life. For other cases, non-alloy/alloy steel is suitable. The height of the nut is also important, which affects the quality of fixation. The higher it is, the better the quality. For massive large structures, it is desirable to use high products, and for household spheres, height does not matter much.

  • Washers

Fasteners are used as metric fasteners. With their help, they minimize the weakening of the joints and increase the area of the support surface when installing hardware. Spring washers look like split rings with bent ends, and flat ones look like a ring with a hole.

Scope of application of fasteners for metal structures

Fasteners for metal structures - products that are intended for fastening structures in the gas and oil industry.

Among the areas of application of such parts, it is worth highlighting:

  • metal structures for industrial and civil purposes;
  • mechanical engineering;
  • machine tool building;
  • pumps, compressors, gearboxes
  • technological pipeline transport;
  • equipment for the extraction and processing of gas and oil;
  • equipment in the food, pharmaceutical and chemical industries;
  • heat exchange equipment;
  • fuel and energy complex;
  • pipelines and steel structures of ships;
  • network engineering;
  • communal services.

Advantages of ordering at Saotron

Sale of fasteners for metal is one of the main activities of our company, to which we pay close attention. Our products have certificates confirming high quality.

Each of our clients receives:

  • an assortment of different purposes, from standard fasteners to products according to the Customer's drawings;
  • products that meet the assigned tasks;
  • delivery on time to anywhere in the world;
  • detailed consultations and free assistance in choosing products from competent and polite specialists.

Our company gives a 100% guarantee for our products. This is possible thanks to our own factory production and the control of the manufacture of fasteners at all stages. All work, from development to shipping, is verified to the smallest detail, so our customers can entrust us with orders of any complexity and volume.

x
Приступим к расчету Вашего заказа
через 2 минуты
Нажимая кнопку, Вы соглашаетесь с обработкой персональных данных