The distance between the foundation bolts must be at least 40 cm apart, regardless of the type of embedded parts and the structure under construction. The distance from the foundation bolt to the edge of the foundation should not be less than 100 mm for bolts with a diameter of 30 mm, 150 mm - for bolts with a diameter of up to 48 mm and 200 mm - for bolts with a diameter of more than 48 mm (according to SNiP).
Installation of foundation bolts
WHAT IS A FOUNDATION BOLT AND THE SCOPE OF ITS APPLICATION
The foundation bolt is one of the most common types of embedded parts. Consists of a metal rod and various configurations, which vary depending on the type of mounted structures. They are used in construction everywhere, from bridges and road junctions to high-rise buildings and factories.
Anchoring foundation bolts is an important construction phase that requires maximum attention. Installation of foundation bolts is carried out in stages.
STEPS OF INSTALLING THE ANCHOR FOUNDATION BOLT
- First of all, do the preparatory work. Check the marked locations carefully for further installation of the foundation bolts.
- Install the embedded parts in the base of the foundation. The anchor should sink in the middle of the concrete base and the distance between the foundation bolts should be twice the penetration depth.
- Wait until the concrete mixture has completely hardened.
- Then you can start bonding. The foundation bolts are tightened using a metal plate or wooden plank. Please note that all the necessary instructions are prescribed in GOSTs (for example, foundation bolt: distance to the edge of the structure to be fixed).
Important! Before starting the installation, carry out an additional check of all embedded parts. For your convenience, the company "Saotron" completes the products with a technical passport, which contains detailed information about the foundation bolts purchased.
DIFFERENT INSTALLATION OF DIFFERENT TYPES OF FOUNDATION BOLTS
The choice of a particular type of bolt depends on the design. The installation of bolts is also done in different ways: For example, curved bolts are installed both before and after concreting. When installing removable bolts, anchor reinforcement is laid in the foundation
Additional information
How to order
The Saotron brand makes every effort to ensure that the production of mortgages according to customer drawings is not just another successful case, but the beginning of new long-term partnerships.
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US ON THE HOT LINE OR SEND YOUR REQUEST BY E-MAIL
